question

nspratt avatar image
nspratt asked ·

Juniper SRX QoS Config

Hi, I'm still learning our Juniper SRX220 Firewall/Router, what would be the best way for me to implement the RC recommended config to our Firewall? I am willing to pay for professional services to help me out if required.

Thank you,
topic-default
1 |1000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

bjsvec avatar image
bjsvec answered ·
There seem to be plenty of guides and posts about setting up qos and traffic shaping on Juniper SRX.  Here are a few I found:

https://kb.juniper.net/InfoCenter/index?page=content&id=KB22066&actp=search
http://www.juniperlab.info/p/implementing-qos-in-srx-210.html
https://forums.juniper.net/t5/SRX-Services-Gateway/VoIP-and-Video-QoS-setup-to-ISP/td-p/78208

Sorry I don;t work on Juniper much so can't be much help, but maybe a Juniper expert will see this and can offer more help directly.  Good luck.


Share
1 |1000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

nspratt avatar image
nspratt answered ·
Thanks,  I've been looking through these and a few others for a little bit. I'll get it sorted. Thanks!
Share
1 |1000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

bjsvec avatar image
bjsvec answered ·
Sure.  qos can be tricky and is a pretty big topic.  I would try to find commands that will allow you to validate what you configure is actually working.  Normally, you can find show commands that will let you validate and simulate traffic to be sure your policies get applied as expected.  When you get something working well in your environment be sure to come back and share.
Share
1 |1000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 10 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

Customer Spaces