question

cglassy avatar image
cglassy asked ·

After last week's Firmware update, Polycom VVX500 Phone stuck as "BUSY"

After recent firmware update Polycom VVX500 now stuck as "BUSY" when viewed via the HUD from my desktop. This line is reported to be now auto-routing to VM even though no Mobile or Desktop App in use on that line where the BUSY setting can be set. The phone handset is not on DND. The phone already been unplugged and reset.  No VM routing instructions are in place in the portal for that line.   We have even tried provisioning a replacement phone and the line is still STUCK.  This is the second VVX500 phone we have had this week with this issue. Both phones were purchased from RC 06-23-2016.
topic-default
1 |1000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

mike avatar image
mike answered ·
Hi Cecile,   I found one other report of this.  You can try this if you wish, or open a support case if you need help.   The fix was to.....

 create a new extension for the user and assign the desk phone there. If this fixed the issue, we can reassign the phone back to the original extension
Share
1 |1000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

cglassy avatar image
cglassy answered ·
Thanks  I have opened a support case, after we provisioned a replacement phone and the line is still "stuck"  on BUSY and routing direct to VM.  We'll see what they can do about it. 
1 comment Share
1 |1000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

OK   perfect!  Thank you for the update!

0 Likes 0 · ·
cglassy avatar image
cglassy answered ·
The workaround you suggested Mike did not work.
Share
1 |1000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 10 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

Customer Spaces