question

cecil-allred avatar image
cecil-allred asked ·

I can no longer log into my VVX 500 Polycom phone via a web browser

Using HTTP or HTTPS has no effect. We just moved to RC from Vonage and while using the configuration of theirs I could log into the web based side of the phone. Now it times out. Any thoughts?

Phone is a Polycom VVX500
SIP ver. 5.4.2.6722

Uncertain of any additional information needed.

Thanks
Cec
topic-default
1 |1000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

cglassy avatar image
cglassy answered ·
05-08-2017  I would suggest you make sure your computer is on the same VLAN as the phones, and that you verify on the Polycom VVX500  what the IP address is for the hardware ---   using IE and https://xxx.xxx.xxx.xxx/   is how we have been able to access our VVX500 phones  for resetting what provisioning server the phones will point to at RingCentral

Share
1 |1000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

bjsvec avatar image
bjsvec answered ·
I noticed after some firmware update some months ago I could no longer reach the web interface on my VVX410 via http.  https does work for me though.  Maybe try again and clear cache, etc since it needs you to accept a certificate to connect.
Share
1 |1000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

cecil-allred avatar image
cecil-allred answered ·
Thanks for the input. I assigned the VLAN and static IPs for all the phones. They are showing that the server applied addresses correctly.

Cec
Share
1 |1000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

cglassy avatar image
cglassy answered ·
06-23-2017 UPDATED INFORMATION Each Polycom VVX500 which has the RingCentral updated firmware in it now has a unique password for web access to the handset hardware.   Note this is different than before when all handsets shared a single Administrative access password (default from factory is 456) but once the firmware has been updated on the RingCentral system, the password changes to a unique password for ***each*** handset.   You can contact your Customer Success Manager or RingCentral Support for the password to the device you are trying to "access via the web browser" - make sure to have the device Serial # (Mac Address) handy when you contact them - this is how they know which associated device password to give you.
Share
1 |1000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

cecil-allred avatar image
cecil-allred answered ·
I can reach it via the server itself, so that will suffice for now. I do appreciate the input. Looks like some time will need to be spent in the switch now.
Share
1 |1000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 10 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

Customer Spaces