Company Call Handling: How to setup 2nd company with it's own phone number and auto-attendant?

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
  • (Edited)
We currently have a 2-line system, so we're obviously a small company. But later this year we will be launching a second business that is completely separate. The new business needs its own phone number (and eventually its own phone system) so I've already added an additional number to our RingCentral account. This will be the main number for the new company and we plan to spin it out into a separate RingCentral account in the future.

The problem is that this new company/phone number needs its own auto-attendant. The new auto-attendant will be something like "Hello, you have reached x company. Press 1 for tech support. Press 2 for sales and all other inquiries." Those calls will be routed to our two existing phone lines.

Unfortunately, I don't see how to create a new auto-attendant to answer the new phone number. I've read a little about something called multi-level auto-attendant, but we don't want multiple levels - each of our main (company) numbers have to be answered separately.

Any suggestions for how to accomplish this?
Photo of Robert Stoeber

Robert Stoeber, Champion

  • 1,748 Points 1k badge 2x thumb
  • confident

Posted 2 years ago

  • 0
  • 1
Photo of Jan Ferguson, Channel Partner

Jan Ferguson, Channel Partner, Champion

  • 31,796 Points 20k badge 2x thumb
Robert,

I do this with my system. My wife has a part-time business and I use a multi-level IVR to handle both our businesses within the same account. I use Advanced Calling Rules for both business's numbers.

When they dial my business (the main number is an 866 #) the Advanced Calling Rule goes to x1000 which is the main IVR landing extension for my business. If they dial my wife's business (an 855#) the Advanced Calling Rule goes to x2000 which is the main IVR landing extension for her business. I use extensions in the 1000 range for my business and the 2000 range for my wife's business. This helps keep the IVR system easy to read.

Then in both cases the caller chooses which selection they want to go to Sales, Billing, Support, etc. It works extremely well for us. Our main numbers happen to be toll-free numbers but it would work equally well with local numbers as well.
Photo of Jan Ferguson, Channel Partner

Jan Ferguson, Channel Partner, Champion

  • 31,796 Points 20k badge 2x thumb
Robert,

You don't indicate which RingCentral account plan you have. Multi-level IVR is available on the Office Premium and Office Enterprise plans. My guess is that you have the Office Standard plan if you don't see any possibility to use thew multi-level IVR.

Contact your sales rep to inquire which plan you have and whether you should upgrade to a plan that has the needed functionality for you.
Photo of Robert Stoeber

Robert Stoeber, Champion

  • 1,748 Points 1k badge 2x thumb
Jan,

That would be correct. My Service Plan says "RingCentral Office 2 line" but everything I've read so far indicates that I don't need to upgrade, and spend more money, because I don't need "multi-level IVR."

The RC help articles themselves talk about the difference between single-level and multi-level IVR.

So, it looks to me like the single-level IVR is included in the basic plan that I have. The problem is that I can't find a help article explaining how to configure it.
Photo of Jan Ferguson, Channel Partner

Jan Ferguson, Channel Partner, Champion

  • 31,796 Points 20k badge 2x thumb
Essentially, you simply set up the company greeting which will include the "Press 1 for Sales, Press 2 for Support, etc." and then those must correspond with current extensions. All you are doing with Single-Level IVR is telling the caller which extension number to press to get where they want. You can also do that in the Advanced Calling Rules. You can only use those extensions you have defined however.

If you want "1" to be for Sales, your sales extension must be extension #1. If you only want them to use single digits, you only have 0 through 9. Otherwise you can say, "Enter 35 for XYZ company, Enter 40 for ABC company, etc.). You just have to make certain that you have that extension defined.

Here ya go for additional info...
http://success.ringcentral.com/articles/en_US/RC_Knowledge_Article/How-to-access-the-advanced-call-h...
(Edited)
Photo of Robert Stoeber

Robert Stoeber, Champion

  • 1,748 Points 1k badge 2x thumb
OH. I see. Sorry I'm so dense. I didn't realize that "press 1 for sales" was simply referring to an existing extension #1.

I had assumed there was something different about a "menu" for the auto-attendant. 

Now that I know what I'm looking for I should be able to make it work. Thanks very much for being patient with me.
Photo of Jan Ferguson, Channel Partner

Jan Ferguson, Channel Partner, Champion

  • 31,796 Points 20k badge 2x thumb
You're very welcome. We were all new at this at one time or another.
Photo of Brian Sherman

Brian Sherman

  • 1,790 Points 1k badge 2x thumb
You should be able to accomplish this by adding an advanced routing rule for the new phone number. Based on that number being dialed you can route the call directly to an IVR group, which will behave like an auto attendant.

Biggest issue with this option is the dial by name directory, which would include all users.