Greetings: What is the best quality on imported greeting?

  • 0
  • 10
  • Question
  • Updated 2 years ago
  • Answered
  • (Edited)
I've imported in both .mp3 and .wav and the company greeting sounds fine in the preview. However, when I actually call my number, the quality is bad. LOTS of "s" sounds and harsh "t"s, etc.

I use Audacity to record, and a Blue Yeti Mic, so I think the quality is good. I've even cranked back the gain as far as -20 dbs before exporting. While it is a MUCH lower volume, the harsh "s" and "t"s still exist. Anyone have ideas?
Photo of Ed

Ed

  • 160 Points 100 badge 2x thumb

Posted 4 years ago

  • 0
  • 10
Photo of Mike

Mike, Official Rep

  • 89,770 Points 50k badge 2x thumb
You can only use .wav or .mp3 audio files.  Wav audio files should be PCM at 8bit 16khtz.

If it's easiest, you can just do the recording over the phone. See Customizing Your Company Hours Greeting

RingCentral Professional voice recordings

Mike
(Edited)
Photo of Mike

Mike, Official Rep

  • 89,770 Points 50k badge 2x thumb
The formats you posted above should work. If they are not we'll be happy to look into this for you. If you wish, you can use this link to Open a Case .  You'll be able to upload the file and then just let us know which number/voice mail you are trying to upload it to. 

Have you tried recording the message with your desk phone or cell phone? (It's not recommended to use a computer)  If so what was the result? 
Here are instructions for those methods if you need them: Uploading voicemail greetings for your Messages-Only extension
(Edited)
Photo of RC-Installer

RC-Installer, Champion

  • 26,482 Points 20k badge 2x thumb
Snap recordings works extreamily well with Ring Central.  I use them for all custom recordings.  Cost effective and works well

Check them out at SnapRecordings.com  

Chuck
Certified RC Installer
chuckfuscone@gmail.com
Photo of Grooms

Grooms

  • 64 Points
I have used the phone to create a recording - same problem - sounds fine in preview and terrible on an actual call.
Photo of Kyle Stutzman

Kyle Stutzman

  • 82 Points 75 badge 2x thumb
I too am having problems with the quality with regular mp3 files.

I've been using garageband to record my messages and prompts. Exporting them as MP3's and then converting them to wav files. The wav file settings are mono 8000hz. 

This seems to be the best so far. 
Photo of Kyle Stutzman

Kyle Stutzman

  • 82 Points 75 badge 2x thumb
mp3 files mono 8000hz work well too.
Photo of Greg YYC

Greg YYC

  • 102 Points 100 badge 2x thumb
I use Audacity as well, and found that by applying the Telephone equalization preset, it makes the sound much better - removes the sybalance (hissy s) and plosives (pops).  The problem is that a telephone has very limited audio bandwidth, so if you remove a lot of the frequencies it sounds much clearer.

In Audacity, select all of the audio clip and then go Effect > Equalization > Telephone (found in "Select Curve") and click OK.  Shouldn't need to adjust any settings in there.