Hey folks,
I'm running into an issue when logging into my sandbox account at (904) 559-1662. I am immediately prompted to enter an Emergency Services Address. However, selecting the existing San Mateo address there fails and entering a new (valid) address does not seem to pass verification (please see screenshots below):
I tried also using my business address and followed the instructions here:
https://success.ringcentral.com/knowledge/TOCArticleRendererPkb.apexp?id=kA280000000GrPb&pubstat...
to ensure I wasn't entering it incorrectly but am not seeing any problems.
I need to make some changes to the queue setup to demo something for a customer and am unable to access the admin menu due to this popup.
I really appreciate any assistance you can provide.
Best,
Rusty
Thanks for getting back to me and I apologize for missing your call. I am unfortunately not in the provisioning step but am instead dealing with an alert/popup that occurs as soon as I log into my sandbox account.
I do see the prefilled addresses there and run into the issue I describe above with the "Emergency Location Provisioning Failed" error message when using them.
I recently found that I can access Phone System Settings if, after the provisioning failure, I access the Users tab first and then attempt to access the phone system settings. If I go directly to phone system settings, I get the same alert/popup.
Since I could access the phone settings in this way, as a workaround, I deactivated the problematic line of (904) 438-2354 and provisioned a new soft phone for my user account. I was able to use the existing e911 addresses when provisioning a new account-- so it appears the problem just occurs when trying to do so through the alert/warning interface as opposed to the provisioning interface. I then assigned the 2354 line to a test account to remove it from my username so as not to reactivate it when signing into the RingCentral Desktop App.
I am now able to login under my username without seeing the alert/error message and can access the phone system settings normally. I'm not sure if this error is due to a problem with that old developer extension I set up, but please feel free to delete the 2354 line and device.
Thanks for your attention,
Rusty
As a standard procedure, we do not allow users to provide a new ( valid ) address as part of the e911 calling. However, that being said you should be able to use the Predefined e911 address when you are assigning a Softphone on an extension as below :
Can you please confirm if you see the prefilled e911 address during the Softphone provisioning?
Also, Can you try Editing the e911 address to the below :
Street Address : 1400 Fashion Island Blvd, 7th Floor
Apartment / Suite #: <<blank>>
City: San Mateo
State/Province : California
Zip Code : 94404
A new Community is coming to RingCentral!
Posts are currently read-only as we transition into our new platform.We thank you for your patience
during this downtime.
Try Workflow Builder
Did you know you can easily automate tasks like responding to SMS, team messages, and more? Plus it's included with RingCentral Video and RingEX plans!Try RingCentral Workflow Builder
