question

nspratt avatar image
nspratt asked ·

Call parking: Transfer Failed

We are a new RingCentral users converted from an old PBX system. After our numbers ported we found whenever calls from the outside come in and we want to park or transfer the calls, the park or transfer fails. On the phone it says "transfer failed" What the user hears is a half a second of the hold music, and then it goes to silence. The person who put the caller on park can pick the call back up again, but it does not transfer to the park line.
  • We are using Polycom VVX 410 units. This seems to be happening about 90% of the time, and with 4 of our 5 offices.
  • Most of the calls are coming in from forwarded Vonage toll free lines
  • We have rebooted the phones.
  • This is in both US and Canada.
Any help is appreciated.  Related case number  04495966

Thanks
topic-default
1 |1000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

kim avatar image
kim answered ·
Being a new customer, you want to make sure the router is configured. Has that been setup yet?   And Nate's response below should resolve any other issues if the network is configured. 
Share
1 |1000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

nathan-malone avatar image
nathan-malone answered ·
I have taken a look at the case you referenced and am working along side your tech support rep to troubleshoot the issue for you.

From the information given, it looks to be an issue with the way that the permissions are set up on the extensions for the Call Park presence keys.

If a phone call comes through a User extension to a Ring Group, such as you have set up for Client Sales, you have to add the call park locations to the presence of the Client Sales extension as well as add the presence of each User's extension that is set to ring in the Client Sales extension. If the presence is not added to the Client Sales Ext., the transfers will fail.

Your case owner and I have received a call sample and will reach out to the case contact directly when we can confirm this is what is causing the issue.

Nate Malone
Tier 2 Technical Support
Share
1 |1000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

nspratt avatar image
nspratt answered ·
Great, thank you, this seems to have solved the problem.
Share
1 |1000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

chris-duquette avatar image
chris-duquette answered ·
my phone all have the presence programmed correctly and all users have access, why would my parks still not work.
Share
1 |1000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

chris-duquette avatar image
chris-duquette answered ·
bump
Share
1 |1000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

Write an Answer

Hint: Notify or tag a user in this post by typing @username.

Up to 10 attachments (including images) can be used with a maximum of 1.0 MiB each and 10.0 MiB total.

Customer Spaces