Echo on RC Phone, but not Glip, same settings, same device.
Tags: ringcentral app, phone
Mar 20, 2019 at 8:45pm • 5 replies • 0 likes
justin-jorgensen
Testing out some devices for office users. No matter what hardware setup I use, the remote person always hears themselves when I use RC Phone. When I use RC App, the remote person will not hear themselves. I tested this in my office, and from home. Same result.
I have already made several changes to the hardware volume settings on the mic levels as troubleshooting steps. It's just weird that the RC App works perfect and RC Phone doesn't.
This would seriously be a non-issue for us IF the RC App could pull contacts from Exchange or Outlook, but that's another can of worms.
5 Answers
I fussed for days with intermittent echo on RCPhone and Jabra GN8110USB, (didn-t try Glyp) The solution to my problem turned out to be adjusting the speaker volume in windows. Control Panel / Sound / Playback /GN8110 device / Levels. Currently set to 7 with no echos. I can adjust the RC control some, and my headset so I can hear the caller well. This device has worked flawlessly until about the last two months, where it had been totally unreliable and only worked intermittently.
Hope this helps someone else out. I am guessing it is caused by Windows 10 1903 update currently running V1903.18362.356. Good luck, it drove me batty for a few hours, but holding steady now. Note that adjusting the microphone volume and RC auto-adjust on and off made no difference...It was a speaker volume issue that must be conduction related?
Hope this helps someone else out. I am guessing it is caused by Windows 10 1903 update currently running V1903.18362.356. Good luck, it drove me batty for a few hours, but holding steady now. Note that adjusting the microphone volume and RC auto-adjust on and off made no difference...It was a speaker volume issue that must be conduction related?
1
We have observed echo when a Windows user used the RC Desktop app which does not occur if you are using the Mac RC Desktop app. This only occurred if you were trying to use the built-in microphone and speaker - if you used a headset this was not an issue. RC had documented the issue but no fix has been deployed as of yet.
1
A new Community is coming to RingCentral!
Posts are currently read-only as we transition into our new platform.We thank you for your patience
during this downtime.
Try Workflow Builder
Did you know you can easily automate tasks like responding to SMS, team messages, and more? Plus it's included with RingCentral Video and RingEX plans!Try RingCentral Workflow Builder
