Skip to main content
The First Step
Nov 3, 2026 9:04 PM UTC
Question

Does the Cisco ATA192 support analog overhead paging

Your device order page states that the Cisco ATA192 “turns traditional telephone, fax, and overhead paging communications devices into IP devices for greater cost effectiveness.” 

But when searching for directions for configuration the AI states the following:

The Cisco ATA 192 is an analog telephone adapter designed to connect analog devices like standard telephones or fax machines to the RingCentral system. It does not inherently support overhead paging.

For overhead paging, RingCentral supports specific IP-based paging devices from manufacturers such as Valcom, Algo, and CyberData. You can find more information on supported paging devices and how to set up paging in RingCentral here: https://support.ringcentral.com/article-v2/Paging-Overview.html?brand=RingCentral&product=RingEX&language=en_US

Can it be configured for overhead paging use as a paging device or another way?

Thanks

Paul

    1 reply

    Crystal_
    Community Manager
    Community Manager
    Nov 11, 2026 7:00 PM UTC

    Hi ​@pdunc, thank you for calling this out! You caught an important distinction, and we appreciate the opportunity to clarify the difference between the manufacturer’s product description and how the device is supported on our network.

    The blurb on the order page is Cisco’s general manufacturer copy for the ATA 192 hardware. While an analog telephone adapter can technically be wired into a third-party analog paging amplifier in traditional telecom environments, RingCentral provisions the Cisco ATA 192 exclusively for analog telephone handsets and fax machines, not overhead paging.

    Here is how overhead paging is handled on RingCentral:

    • Cisco ATA 192: Configured strictly to convert analog voice/fax lines to SIP. It does not natively support RingCentral’s SIP paging groups, multicast broadcasting, or auto-answer overhead features.
    • Supported Overhead Paging: RingEX integrates with certified SIP-based paging adapters and gateways from manufacturers like Algo, CyberData, and Valcom. These devices register directly as SIP paging endpoints on RingCentral and wire straight into your existing public address (PA) amplifier or speakers.

    For a complete breakdown of certified paging hardware and configuration instructions, please visit our guide:

    https://support.ringcentral.com/article-v2/Paging-Overview.html?brand=RingCentral&product=RingEX&language=en_US