Phone

I have 4 lines displayed on my phone. I needed to change 3 names on the phone. I successfully changed 2, however the main line - line 1, did not change on my phone display but it changed in the settings. Is there a way to fix this? I did unplug phone and reboot, did not help changing the 1 line. I'm on hold with support for 30 minutes and not sure how long I can hold. Any assistance is helpful

US Account: Our business hours are set as 9 - 5. However, I don't always leave the office right at 5. In addition to our calls being forwarded to our on-call number after 5 each day, is it possible for the after-hours calls to also ring simultaneously to all of our office extensions, so if someone is still in the office, they can pick up the after hours call as well?

So I had a ring central that canceled in November 2018. I wanted to get my old number/account back. I chatted with an agent online and when I gave him the number, he couldnt find it in the database. I gave him my email address, and he found the number and advised I needed to get a new account created. I create a new account using the same email address as the previous account. I call back support and they cant find the number anywhere. I suggest a port, and he said according to the port they still have the number and are not able to complete the port, but yet my number doesnt show up in the database. Any suggestions???

Hello - I have a question please:What would happen if I left the Company Caller ID Name blank?Does the system allow it AND what would then show when outbound calls were being made?Thank you, in advance, for your help.Michael

How do I know when a question has been resolved?

there is an option from ringcentral portal to set caller id for local number, after I entered company name exactly the way i want it to appear, but it won't work. It only show the number when I do outbound call.Can ringcentral help me with this feature?Thanks.

I have proved that by letting calls ring through and not answering, they are showing up as refused calls in my system; can this be true?

It's been over 3 months we have been complaining about the sames thing, calls being dropped or clients getting message please enter your voicemail password" instead of getting our greeting. Every time I call to fix one thing they mess up another. Just yesterday we called again with the same issue about clients complaining that our line only rang once and called was then dropped. Mary the person who got our call at ring central now disconnected all our greetings and only 2 phones ring. I am ready to throw the ropes and leave them after almost 10 years.

Robocalls.Does the RingCentral app accepts robocalls. Having issues with major sites (Apple, Bing, Yahoo, Superpages) being able to verify my business site by calling my RingCentral phone. The phone either does not ring or I just get a missed call message. Thanks in advance.

Is this even possible?The default soft keys are assigned to redial, dir, intercom and dnd.I would like to change intercom to "missed calls," which would save me the trouble of punching list/call history/missed calls/select.Can it be done?Thanks!

We need to route incoming calls from a particular number with an extension. What is the RingCentral standard for entering in the phone number. This is not only for enabling these rules, but also so that we can keep our data consistent with our SFDC org. I'm having troubling finding documentation on this issue. For example, I need to forward a call from (800) 555-1212 Extension 101 to our Sales Queue. How would I enter this number in to route based on the caller ID phone number? Would it be 8005551212#101, or 8085551212.101, or is there another format that we should follow?Thanks,James

I just noticed that Glip calendar can be edit by guest and admin don't have control to restrict that? is this a bug or something? i have a guest that changed the meeting time for everyone which create confusing among other members and messed things up. we can't depend on glip calendar if there's no admin control to that, please advise if there's something i can do to prevent that.

I have been using RingCentral for the past 3+ months; I have done a lot of automation around passing DTMF along with phone number - For example - tel:8664567890,,,12345# -> This would dial this 866 number and after the call is picked - will pass 12345#.This has been working flawlessly but somehow it stopped working a couple of days back when i started testing.Could you please help me resolve this issue.

Hi all, We're using RC Glip desktop app. Our users are having an issue that when they're working from home RC app will open and close seconds after. It will continue doing this until you close it down in the system tray by right clicking and 'quit'. This is happening for all users when working from home (they dont use VPN) and dont use Outlook integration. They all work fine in the office (on our LAN), but as soon as they're use external wifi connection it continually loops. I've logged it with RC support, but they're not familiar with this issue. Has anyone else had this issue? Thanks for any help as I'm all out of ideas. Mark

I am looking at signing up for a virtual receptionist service to take calls when I am unable to instead of the call going to voicemail. I am in their trial period right now, but cannot seem to get it to work. Ideally, I want it to try me first, then if I don't pick up, it forwards the call to the external number which was assigned to me by the service.I added a new user without a phone to my account and assigned that external number to them, then added that user to my queue. But the calls are not being sent to them when I don't pick up, it just tries me again.

We have a need that support has not been able to assist with to date.Caller calls in to main line and request Service through IVR (this works and goes to a single extension today)We want to add a group between the IVR and the single extension.For the group, we wanted the following:1) Ring for (4) specific users2) Ring all their devices (Hard phone, soft phone, mobile phone) simultaneously3) Wanted the feature under Phone system groups that allowed us to set the Caller ID so when a service call came in, the users could see it was a service line callThing we tried and why it didn't work1) Created a User Extension, put all (4) people in a ring group on simultaneous ring, added the single extension to the end of call handling sequentially after the group. ISSUES: Did not allow users to see it was a service line call, Would only allow us to assign Hard and Soft Phones (no mobiles). If we co

Can you edit a conference call recording? The beginning of my conference call started a bit too early and there was a conversation going on that recorded. Am I able to delete this without deleting the entire webinar? If so, how?

We have three Yealink W52P base stations and six W56H cordless handsets. We also have six telephone lines. We want each handset to have its own extension and be able to communicate seamlessly throughout a large warehouse space. We expected that by linking each handset to each base station, that this would enable maximum mobility with the phones. However, when anyone calls a number, all the phones ring. They all show the same extension. Is there are way to have six extensions on the six handsets and be able to configure a call flow/pattern?

The Ring Central Desktop App (BIG R) is freezing when trying to DL a recording. I found Avast Antivirus was identifying Update.exe and Ringcentral.exe as IDP.Generic, so i have submitted to them the files, as well as created an exception at the folder and executable level. However, i am still having issues with Downloading the recordings on one machine as of right now. Has anybody seen this?

Hi,since few days I cant open the RingCentral Gilp. If I try to open i get this message:This email is already registered: ....I didnt change in my account details or my email or what ever. Can login in to my account in RingCentral but if I want open the button to RingCentral to the Glip I get a blue screen and this message.Can anyone help me?

I would like to have my operator extension ring to 2 users in a specific order. so I set up a queue and set up the Operator to ring by the queue. It doesn't seem to work it just rings by a random user. Any idea how to fix this?

I have my office hours set to 8 AM - 3 PM. However, I am part of a Support Queue for after hour emergencies. Can I & if so, how do I set it that if it is a Queue call for it to ignore the business hour settings?

Updated to latest manually and it reverted back is this standard for the Ringcentral

We are planning to deploy Ring central Phone ( Desktop ) on server 2012 OS with multiple session on single server. Please confirm below :Whether this will support Server 2012 Operating system ?Whether this will Support Multi session on Single server ?

I use to be able to receive calls on my desk phone and desktop/mobile app. All i had to do was turn off the Data VoIP Calling in the phone app to not receive business calls on my cell phone. Now even with the Data VoIP off calls come through, but if I'm on a current call or my personal carrier line on my cell , the current call I'm on will fail and end the call coming in. My Iphone has been doing this since the new IOS back in Sept. Is there anyway to get the app to work like it use to?