The First Step

Question

Desktop App: Messages & HUD are not refreshing

Forum|Forum|10 years ago
September 14, 2016
14 replies
2350 views

I am having issues with software not refreshing.

Message notificationstake ages to arrive if at all
HUD claims that either other phones are available,but they are not or they are active and they are not.

I do not believe its a firewall issue or anissue with my router. I have turned SIP ALG off on my router which made nodifference. We have 6 seats on Windows 10 and 7 and both behave the same. I havecalled the help desk to be only advises to uninstall and reinstall.

K

kim

Employee

The new versions of the softphone use a new set of IP subnets to signal presence for the HUD. In order for the HUD to work correctly you need to make sure that your router or firewall will allow traffic both inbound and outbound from the below noted IP addresses over the ports listed on our network requirements page.

This list of ranges is specifically for the Desktop App:
Check for Network Requirement updates here: Network requirements

54.249.82.128/26
54.236.3.128/26
54.241.191.192/26
54.246.196.128/26
54.207.127.192/27
37.58.79.160/27
198.11.216.98/27
5.153.35.160/27
50.22.5.112/28
54.175.63.64/26
54.93.127.192/26
54.209.255.64/26
54.241.191.64/26
54.219.189.192/26
52.4.63.128/26
54.233.127.192/27
54.219.189.64/26
54.175.191.192/26
54.250.252.0/26
54.171.191.192/26
54.93.254.192/26

Other things to try:

(MAC) Clear Softphone library data to isolate any software issues with message threads loading properly.
(MAC/PC) Ensure that proper ports are setup on local network; For example, ports 8000-8200 are utilized for softphone functionality.
(MAC) Make sure that OS Xs integrated firewall is not blocking RingCentral for Mac, and allowing full access (System preferences/Security/Firewall).

Note: Windows 10 is still in beta at this time.

I hope this helps.

B

barry-elk

The First Step

This reply was created from a merged topic originally titled Desktop App for Mac - slow to display messages. OS X - 10.11.1
RingCentral for Mac
Release: 7.4.1.17562 (64-bit)

Mac users are experiencing two types of delays related to RC Desktop for Mac.

First - severe lag between desktop and mobile message delivery. Quite often can read message on mobile RC app before desktop app will even display notification of new message.

Second - lag or sometime no display of message thread. Clicking on a message thread (whether there is a new message or not) will display a blank screen with no message history. Closing that thread and re-opening will usually restore.

Third - hitting SEND from from desktop app will often show a 5-10second delay with the green progress bar and the word SENDING at the top.

Is this a client or server-side problem?

M

mcgough-and-associates-llc

New Participant

I also am having issues with the desktop app not refreshing. Today is February 13, 2018 and the last message showing was February 9, 2018. I had to go to my mobile app to even retrieve my faxes. The app does refresh if I remove the program and reinstall but what a hassle.

A

adam-robinson

Author

The First Step

You will find that it still will not refresh even after a reload, waste of time. It will also certainly be your router not compatible with RingCentral, I know mad for the number 1 software. I had a Draytec router which is not that uncommon to finally be told it will not work finally after many painful calls to Manila. I change ISP to Virgin, used their hub and it works 100%

Very poor, wish I would have signed up to a different VOIP provider now.

B

bob-robinson

The First Step

We intermittently get this problem. Our network settings are up-to-date but we still have users that receive an e-mail notification that they got a text, only the desktop app shows nothing. They have to scroll to the bottom of the list of text messages to click the three dots (show more) and then the new text will appear, but the same happens again for future texts. Similar issue for faxes.

I'm sure I'll be told to go to the idea center for a product suggestion, but could they at least move the refresh option (show more) to the top of the RingCentral Desktop app window?

S

saadet.swift

The First Step

Hello Everyone,

If you are having these issue, please open a case so we can get the debug logs from the softphone and investigate what's going on.

M

merillat

New Participant

Same issue. Started a month or so ago. Intermittent. Sent the Debug files along with screen shots etc. Get the standard reply to verify router settings, etc. Have looked at the debug files and clearly see that the api calls to pubnub are coming through so it's not a router issue (Cisco ASA 5512). Works perfectly for x amount of time, then fails. Guessing server side issue.

R

ryan-wessel

New Participant

Mac Client Ver. 9.4.3 I have the same issue -- call history fails to update and texts will come 10 seconds after I get them on my mobile device. This happens at both my office and home. My computer is in the DMZ on my router and the Mac firewall is shut off. So I know it's not a firewall issue. What do you expect.. we just got picture text messages ... I feel like Ring Central tech side is old and antiquated.... like a bank for 486's with power stackers ...lol

C

cj-patracone

The First Step

I have the issue where it is always a day behind, will they be improving this app anytime soon? I really just use it like a old phone that has no features. I have run into all sorts of issues since the implementation of ring central.

C

cglassy

Participating Frequently

USA-based acct | 2287 Users | 3800 DID lines | 28 sites | all Polycom VVX500 phone handsets

2018-05-18 You can download the updated version of the RingCentral for Windows HUD (now renamed RingCentralPhone) here and it did resolve the same issue for us.....

https://support.ringcentral.com/download.html

Show more replies

Sign up

Login with SSO

Login to the community

Login with SSO