Ask The Community

I understand Breakout Rooms are coming to RC Video, is there a specific date this will be available?

Is there a concept of a "system wide speed dial" - I.e numbers we can program in that can be speed dialed from either a soft button on each phone, or dialing a special code (I.e. dialing "*1" from any phone on the platform would call a number we have defined in the system?)

We would love to have the option to have more than 0-9 key presses then just the typical 10 buttons.

Once a caller enters the call queue, they have to reach Maximum hold time for an available member.. Would love the ability to allow a user to press X to leave a voicemail while actively holding in the call queue."Thank you for calling, all of agents are busy. Please stay on the line or press X to leave a voicemail"

We sometimes receive calls into the wrong department. It would be nice to be able to transfer calls to the call queue of the correct department rather than choosing an individual to transfer to. Thanks!

According to this article ((1) Update Call Queue Messages and Notification Settings on the RingCentral Online Account), which by now may have been conveniently changed, it states that the option mark voicemails as read once they've been emailed should be available to select. However, the whole advanced settings menu is missing with no way to enable it.Live Chat tried to tell me it's better for it to go to a specific extension, and create an email distribution group which is great but then the forwarded users personal voicemail will also go the distribution group.All I'm trying to achieve is once a call comes into the call queue group and goes to voicemail, it gets automatically marked as read once the email goes it with the attachment on. Doesn't seem there is a way to do this unless I'm mistaken

New to this...How do I set up an extension on a handset in a common area/room so that the extension can only dial to other extensions. The extension does not need outside dialing.Thanks,ft.

We used to be able to access the GUI for changes by going to:EX: https://192.168.1.67/This password was:- 456- 72227- MAC Address?- Secret URL ###: "admn803864912024pwd" from ---> https://voicemanager.businessconnect.telus.com/application/company/phones/803864912024/detailsBut not we cannot get in, has there been an update that has changed how to access it?I know I can still perform a hard reset by following this KB: https://support.ringcentral.com/article/Third-Party-Polycom-Phone-Not-Accepting

How can a call queue member access and manage the voice mail messages left on call queue voice mail box? Can a member manage the vm's from the RingCentral windows client?and/or Web Client?As Call Queue manager with full access we can see and manage the vm from the web client but can do from the desktop client?

Slack allows users to add custom emoji on their desktop from images in JPG, GIF, or PNG format. Slack then will resize the image, so you’ll get the best results with a small, square picture.I would love to see this functionality in Glip!!!

Our app works fine in Sandbox, however in Production it's throwing a 403 error. We're using the correct credentials for each environment, and have the phone numbers in E.164 format.Any suggestions for steps that may also be needed to get approval on the app?

As a company we use many providers, and it would be helpful to be able to add these to a company directory so people don't need to save/update the number individually.

I'm currently trying to delete users I'm using for testing purposes in order to be able to run more tests on my Sandbox environment.I have disabled the desired user first, as is required to have the Delete option be available, but am not able to delete it.- I have tried using the tickbox next to the User's name and clicking Delete in the top ribbon. I get the pop-up warning about deleting users and how it cannot be undone. I proceed and see "Bulk Operation in Progress" going, and then finish without any further notices or errors, but the user is not deleted.- I have also tried using the three dots on the right-hand side of the user and clicking Delete. Similarly, I have the "Are you sure you want to delete the selected user" warning message. When I click on Delete, I get an error message with "We are sorry. Your request cannot be completed at this time. Please try again later.".I initially thought it

I'd like to follow up the feature request of mass-texting. Instead of copy and pasting one phone number at a time from a spreadsheet; is there a way where you can choose multiple cells on the Excel and paste it to Ring Central App to mass text?

I have gotten used to the new desktop app and I have started to like it, but I'm puzzled as to why there are so many design inconsistencies between the mobile app and the desktop app. Did the developers not talk to each other?For instance - my contacts are completely different on my phone than my desktop. If I'm at my desk and the phone rings, it will show up as Person A on the desk caller Id and Person B on my mobile caller id. Seems like they would both be accessing the same contact list. Is the contact list stored on each device not on the cloud?Also, on the mobile app, I love the ability to filter to view unread/unheard messages. Can't do that on the desktop app.

Can I schedule recurring video meeting in Glip to get constant link that I can send to participants? Like with PMI?,Hello,is there a possibility to chedule recurrent meeting in Glip like in Zoom? I want to get constant link, like for PMI and send it to group of people, who will join my video meeting every week. Can I do this?

I have a user that has a few speed dials setup on his phone. However, for one of his contacts, if that contact receives a call, his phone will ring too. I've looked everywhere for a setting but can't find how to turn that off. What is the secret? Thanks.

I'm writing this message a second time since the first one didn't go through after clicking on 'Post your question'?? I've also called the support line twice and started a ticket but both calls dropped.The first time I noticed the issue and learned to live with, was the way texts appeared when using the mobile app on my android. Texts were not in chronological order. The workaround for me was simply to then log into my desktop app and the texts seemed to be in order. But now it’s happening on the desktop app. I type out a message hit enter and it doesn’t appear and/or the texts get jumbled with other responses from previous days.Today I got as far as having the second

I have recently became a Ring Central client. I have noticed some differences in the PC app and the Mobile Phone App. When I assign a task I can do a reply in the app to the task and it keeps it noted in the task but you can not do this in the pc app. In the pc app you can only respond in the team witch has all the task in it so you cant tell witch task your responding to. Where is the Reply to task like the mobile app has.

We are having some trouble getting our app graduated to prod. We know we have enough successful requests to graduate (according to our dev team), but the dashboard hasnt updated in 3 hours and wont let us submit it for review. Is there a way I can force the dashboard to update or a way to manually get the app into prod?

I am brand new user and have tried to google up this answer, to no avail. We just started using RC at my company and I do not understand the difference between "Desktop & Mobile Apps" and "XYZ's Softphone" (see pic below). These are the defaults that got created with our accounts, but to me they both refer to the same thing? Or does Desktop in this case refer to a physical handset sitting on top of desk and if that is the case, what is meant by "mobile apps"? I thought Softphone referred to the software applications that run RC on my laptop/PC and/or my mobile devices. Please help clarify. Thanks in advance--

Can admin force a "Log in/Log out" in a call queue? Would like the user to remain in the queue but only have them answer calls when really needed. Is that possible?

I am able to successfully send a SMS using sandbox. How can i read a message that was send to sandbox?Its a 2 way communication.Is there a endpoint url or i need to use Webhooks for this?

Some of our users are abusing the ability to change their hold music. Access is granted to them through the "Standard" role. I don't see any options to create a custom role though, is there a way to block their access to the hold music on their extensions?

I am trying to find a way to record JUST the speaker in a Glip Ringcentral video meeting. It is available in Ringcentral Meetings, but not Glip's Ringcentral. This is a deal breaker for Ringcentral - whether it be a teacher using this for virtual classroom or a business meeting, being able to record just the teacher/leader is an essential ingredient that should be rectified immediately! But in the meantime, is there a work-around to record just the speaker? I love Glip but without this necessary function - too many will be forced to move to another platform! Glip Ringcentral has so much to offer that other platforms lack but this..... THIS is unacceptable and deems it non-functional for many in education and business - and will cause many to jump to another program. I have been consulting schools, churches and businesses, touting Glip..... but what to do about this one huge STRIKE.... I know you all have amazing ideas! Shoot them at me! HELP!