Phone

WebSocket connection to 'wss://sip131-1221.ringcentral.com:8083/' failed: WebSocket opening handshake timed out

  does anybody know how to get a T46S YEALINK phone system to recieve and make phone calls after the ring central app has been upgraded 

I purchase the Yealink W79p with 1 phone and I purchased 2 extra phones. I can get them registered to the base but cannot get them provisioned enough though I am following the instructions to the T. I reset the base and phones to their factory settings, the I followed the instructions for auto provisioning. They have also been updated with the latest firmware. I am at a lose. I even tried manually provisioning and at least that gave me a green status on one of my lines in the admin portal but the provision still failed on the phones.  

All users are on windows 10, primarily using Salesforce Browser to make calls. One user only has an issue where at the beginning of the call, the volume from his microphone is very quiet. After about 10 seconds, the volume jumps up to a normal volume.Issue persists on two different computers, different manufacturers, different sound chipsets.Have tried 3 different headsets, latest one an RC recommended one.Issue has happened on 4 different ISPs and Wifi locations.Settings for 'communications' under sound is set to 'do nothing'Switching calls between rc phone and rc app causes the issue to restart.Microphone Gain is set to +6DB and stays there. Windows updates fully up to date. Turned off 'allow apps to take exclusive control' in microphone propertiesIf the user snaps the microphone boom to make noise, that sometimes resolves it. **ISSUE DOES NOT HAPPEN ON LAPTOP BUILT IN MICROPHONE*

Can a Poly Rove B2 Base be provisioned to support multiple Poly Rove 40 handsets with each assigned to a separate Ringcentral User? 

I’m looking for confirmation that all fax history falls out of the app every 30 days.   I have a user who is saying their history is blank and they were looking for faxes sent  two months ago.  

Shared Lines. Can another user join an ACTIVE call on a shared line?Like the AB Shared Line is called. User A answers. Can User B also join the line while the call is active?If so, how?

How do I change the main phone number for our RingCentral since we moved our office to a different county and want a local presence?

Hi, We had this pop up two weeks ago but only on our T46U phones. Whenever we try to view a missed call or view call history in the menu, we get an error message that Authentication Failed. Please Try Again. This is across our entire organization. I put in a support ticket, and within a couple of days, I received two phone calls and an email from Ring Central telling me that it was a known issue affecting several of their customers, they had re-created the issue, but didn’t have a resolution yet. A few days later, Ring Central closed the support ticket as resolved, but we’re still having the issue. I re-opened the ticket and tried to escalate it, but I’ve not heard back from anyone at Ring Central. This is causing significant issues in our workplace, so I’m trying to find a solution.Thanks, Mike Camden  

When I receive a .vcf or vcard file (i.e. someone shares a contact record from their cell phone) via an inbound text message to my RingCentral number, I can't open the file or directly add that contact, without going to a desktop and opening via another software. For example, with my iphone, if someone sent me a text with a person's contact record (as a .vcf file), I could open the contact record right from the text message application and add the newly received contact record directly to my iphone contacts. Now, when someone sends that exact same message to me via my RingCentral number, I can't open the file on my phone, can't add it to my RingCentral contacts, or do anything else useful with it until I log into RingCentral.com, download the file to my computer, then open via 3rd party application and manually type it into my contact list on RingCentral. That seems like a major step backward in technology! Am I missing something here? If not, w

We have a seasoned employee that has been using ring central desktop app for a long time.  Her Polycom vvx 410 phones red light stays on even after she has deleted all the messages, faxes, and etc .  We tried a couple of things like restarting the phone.  This will work until someone calls, then it stays on until we reboot the phone.   We also did a update that was inside the app but that didn’t fix the issue.  Please help.

Hello, new to ring central with company and i am looking for other ring tones to add to my receiveing calls list instead of just bell and other one where can i get more ring tones? current version is: 22.3.0.44615 thanks

Is there a way to get RinCentral to automatically activate DND mode when a call handler is in a call or meeting on another app? For example a Google Meet or MS Teams meeting? I have been looking through the admin portal settings and online articles but have not been able to find a way to set this up. Thanks!

I don't want to buy a Plantronics or Jabra headset. Is there a way to make other wireless headsets/ear buds fully functional when using the RC Desktop phone app on computers running Windows 11?

I have revised my tcr and my privacy policy on my website was written by my lawyer. Still was acceptable by tcr registration. What else can I do to get texts working for my company? This is important for my business to communicate with customers. Thanks for looking into this

I am using the Ring Central CTI for Salesforce.but I cannot make an Outbound call; it throws an error.Can anyone tell me why I am not able to make outbound call?

several employees have reported to me that after installing the ringcentral app on their iphones, they get a notification: “Allow App and Book assignment”. you have either the option to cancel or continue, both options will only make the app pop the notification again after a few minutes. it can last for days. all devices are on the latest IOS. 

We have a couple of Yealink T58W Pro phones with the camera, and I cannot for the life of me figure out how to do a video call with another person with the same phone. Not trying to do anything fancy. I know the camera works because I can see it working on the camera app.

The old RingCentral Softphone would mute (and pause) podcasts, Spotify, etc. when answering a call. There's an option to choose this here: https://support.ringcentral.com.au/s/article/RingCentral-Phone-Desktop-Reduce-Mute-Other-Sounds-Windows-During-Call But it got dropped out of the new release of the "RingCentral app".

Anyone else have issues with firmware update crashing their phones?  We can no longer receive calls for our business, everything goes to voicemail.  After spending 5+ hours this afternoon, they agreed that we need new hardware agreed to replace all of our devices.  However, a few hours later, I received an email saying that we were outside of our warranty and to please call them about purchasing new hardware because they wouldn’t replace.  I’m sure we’re not the only business with this issue and am thinking this might be grounds for a class action lawsuit.  We paid a lot of money for this hardware and I never received an option for an extended warranty.  I also didn’t expect all of the phones to go out at the same time.

I’m thinking it will help if I explain our use case and then ask the question:We’ve purchased RingCentral and Yealink phones that I’ve installed into a daycare facility our church is starting. I’ve installed a Yealink T33G in each classroom to be used solely as intercom devices (to and from the main office) and to make emergency calls to 911 if necessary. When I did the Ringcentral onboarding, they had me set each of those up as a common area phone with a limited extension. We have a Yealink T46U with an external keypad in the main office. That phone will make and receive calls as well as serve as the “switchboard” for the intercom system - paging classrooms individually and hopefully in groups if there are any announcements that need to be made. When the T46U in the main office pages a T33G in a classroom, I don’t want it to ring and the receiver need to be picked up (like is what happens when I try to use the Intercom Key in the admin panel for the T46U (see screenshot

When using the conference feature, there's a 3-second delay when speaking, regardless of the number of participants. How can we fix this? This issue doesn't occur with simple transfers but always happens during conferencing, causing people to talk over each other.

On a Poly VVX450, can you assign a delegate line to be the primary (outgoing) calling line?  Specifically, if the user just picks up the phone to dial a number, their main extension (the upper left corner of phone, position 1) lights up.  The user has 3 delegate lines on positions 10,11,12 on the phone.  Can we default the outgoing call to use one of the delegate lines instead of the primary extension for the user?The user can manually press one of the delegate buttons to make the call, but we are trying to simplify for them so they can just dial-out and it will be on the delegate line.NOTE: We have Caller-ID for both their primary line and the delegate line to use the same #.

About 85% of the time, when I answer a call using the Ring Central App on my PC, and then transfer the call, I get a window “Transfer failed”. If I then go over to the desk phone and transfer that call it works fine. any ideas? Once in a while it works. Its a brand new PC, latest software, brand new network cables on fiber optics connection.

I have asked this in the past - but thought I’d bring it up again.Does anyone know, if RC has any plans of introducing the opinion for:Callers to dial zero when they reach a voice mail to be transferred to another (pre-determined) extension? Employees dial zero internally and reach the ‘operator’, (the operator ext. would be pre-determined).