RingEX: Phone, SMS, & Fax

Compatibility of IOS SIRI with mobile app, if its not compatible...any news if it will be?

After request for porting for some numbers initiated, RingCentral using Super Admin's Name as a CNAM for these numbers. That affect all calls from these numbers showing Super Admin's name instead of actual/desired name. Why don't you have a field for that and use it for an appropriate CNAM? It really confusing users when call shows wrong person's name. Again, this is ONLY for internal Ring Central users. We have multiple sites and each of them has different CNAM, such as 'Building A', 'Building B', 'Building C'. I porting multiple numbers from all of them. Multiple numbers from multiple sites are scheduled/pending for porting. Now when someone call from these numbers Super Admin's name displays for CNAM! WHY???

WHY does transferring numbers into RC now take over 2 weeks? The last 3 numbers I have transferred in to RC have all provided a "scheduled" date of 2 weeks before they will even start the process. We have provided 100% of all required info (acct number, pin #, owner info, copy of bill, etc.).We have also transferred several numbers to other telco companies and they have been able to complete number transfers (porting) in 3 to 12 hrs - not days!This makes it very hard to sell to new customers we service, when we can set them up on RC almost instantly, but then it takes 2 to 4 weeks to get their number(s) transferred. We are loosing customers over this.

I saved my password using my email as the login l on Feb 6, 2019. I have been using Glip account since then. I just tried logging in again. RingCentral says my email address isn't valid. I am in the U.S and use a Mac (v10.14.3).

Is there any way to change the ring tone on my iphone for the app? It uses a different one than my regular calls, but I don't want to use the xylophone which seems to be the default.

I am looking for an installable copy of version 10.2 for my Windows desktop. I installed 10.3 this morning and my mic wouldn't work. I contacted Support and they don't have it.

When I am making phone calls. I usually press 0 for operator and things like that. Before the 10.3.5 update, I was able to just press keys on my keyboard to input as a touch tone phone. Now that doesn't work unless I click the "Keypad" button during the call.

When Do Not Accept Call Queue Calls are turned off on Ringcentral Phone and you go from Available to Do Not Disturb on Glip it automatically turns your Ringcentral Phone to Accept Queue Calls. This did not use to happen. It started happening in one of the latest updates. Can you change so that the Queue Call toggle button doesn't get turned on in the Phone when available in Glip?

When trying to call a co-worker using just the extension in the new RC mobile app, it doesn't work. We get a recorded message that says " Sorry your call cannot be completed" then a fast busy signal. Extensions work using the desktop app. Is there a setting in the mobile app to allow dialing extensions and not the entire 10 digit number?

So I finding the industries and competition is becoming dirty and just using system to mess with us... I real compliment to our work.. ha.. although it is taking away from productivity which is the reason they doing this... sending deal VM to our system regularly four times a day.. SO there is a technology I just learned about..https://www.fcc.gov/call-authenticationI want to know when Ringcentral is going to have this in place to commit to providing the best and easy way to fix this.. Finally one and for all..

I have 3 voice prompts and 2 ext's. When I'm logged in on ext101 I can see all missed calls and receive VM's on the app. The challenge is when calls come to ext 102, I don't see missed calls and the VM gets emailed to me from RC stating I need to log into ext 102 to listen to it. Im a small operation and have "super admin" rights, why does one have to log in and out all the time?

Has this been fixed yet?

Admins should know how long an agent has been on a live call for. Or how long they have been waiting for a call for.

While investigating significant data loss that recently occurred within our RingCentral business account (e.g., the loss of 3+ years of SMS correspondence with our customers per Case Number 08276193), we've just learned from RingCentral technical support staff that RingCentral's development team, needing to "improve" SMS system performance, recently imposed hard limits without providing prior specific notice to all RingCentral customers and without providing recourse before enforcing these new data caps. In the course of rolling out this service "improvement", it appears that we (among many other RingCentral customers) have experienced significant SMS data loss.While this change was made to improve on-going service (which we, of course, should/would appreciate had it not caused grievous harm), RingCentral's failure to give notice and provide recourse before enforcing its new data caps is a serious dereliction of duty in safe-guarding its customer data. W

Hi,My account is in the UK.I am a small one man business and have been using ring central for a few years now. I have 3 different numbers coming into the system all set up the same, coming through to either my yealink on my desk or through to my mobile (cell) using the app.What I am looking to do is set my system up so that during the day, say from 09.00 to 19.00, the phones will ring and if nobody answers then it goes to answer machine, like it does already. After this time, I dont want the phones to ring and go directly to the same answer machine message. Basically out of hours I just want the answer machine to kick in without it waking us up in the house, where I have my office.Im sure this can be done but I just cant find an idiots guide to it without me making a complete mess.If anybody can help it would be really appreciated.ThanksNick

I want to assign/setup specific emails for fax notification for different numbers.

I'm based in the UK and have just got a load of Polycom VVX600 phones to replace the desktop app, mainly as they are supported on RingCentral and our Bluetooth headphone work seamlessly with them.The problem I have, is that none work guide the assisted provision steps. I have to use the manual process.I have upgraded one phone to the very latest Polycom Firmware and still no joy.Does the assisted process provide additional features/integration with the RingCentral server, that you do not get when manually provisioning them?

Disabe email uniqueness requirement please. I'm at a nonprofit that has people come and go fairly regularly. So in between them we need to return the their extensions to a generic email address. Like when the extension was created. However ringcetnral doesn't allow that once the extension has been configured. Please add this new feature! I do not want to have to keep extensions attached to nonexistent employees and don't have that enough emails use for this purpose.

We have 5 users, we have our main number forwarded to each person's extension simultaneously for all to answer at their desks during the day. If no one answers we would like that to be forwarded directly to the main phone voicemail... not each person's individual forwarding list. How do we separate where the main number forwards from where the individual extension calls get forwarded?

Hi - when not on WIFI and using my RC phone app - what is the usage per minute for an active call ?I assume calls to me or from me , both generate data consumption drawn off my monthly allowance.

Hi, I received two faxes. Logged into my RingCentral account to view the fax. When I click on the icon to open the fax, it does not open as a .PDF. I get an error message because it is trying to open as as a .TIF. RingCentral no longer allows me to get customer service over the phone (they have a number, but when you go through IVR prompts, it eventually tells you that you need to go online to get Chat support and that it is it, it just dead ends). So I went on Chat. After more than 1 hour later and rep still had not idea how to solve the problem (actually very little progress had been made as there was just delay after delay in the reps response). They told me this had to go to level 2 and that they would get back to me within 24 to 48 hours. I cant wait that long. A supervisor did call me back after a while, but he told me he could not help me. He also told me that they would send to level 2. I demanded to speak with someone and they tried to put me through to a level 2 so that they

IS there a way to change a limited extension into a full extension on the Admin Portal, or does it require a call to RingCentral?

Since the latest RingCentral Phone Desktop update, the commonly-used keyboard shortcut Ctrl+C to copy text from a SMS conversation window no longer works.Text in an SMS conversation can be highlighted, but the commonly-used keyboard shortcut Ctrl+C does nothing.

Want to be able to log in my softphone from home without having to disable my office. I was told this was on the roadmap for last fall, but I still haven't seen it. What's the status? Thanks.

Can we set up RingCentral so that we can text out from a desktop numbers but recipients can only reply to us via text. In other words, We want to be able to send out a text from a desktop number but we don't want people calling us back directly. If they call back, we want them to go through the main number. of course we want this feature to only apply to outside calls - to clients. We still want to be able to call Active staff from my desktop numbers.I realize this cannot currently be done but I would like to request that this Improvement be implemented.